We are pleased to offer one of the easiest do it yourself sunrooms in the market. These units can be used to create an entirely new sunroom or to enclose an area with an existing deck and/or roof.

These sunrooms can be erected by do-it-yourself clients and offer an excellent balance of quality, price, flexibility and time savings in erection time.

Although each unit is custom designed, they are manufactured in a manner, which keeps your cost down. The custom modular units result in easy and speedy erection of your sunroom.

In addition, the fabrication of these sunrooms can accomodate slightly out of level or square exisiting conditions within limits and are designed to be attached to your home or park model trailer.

Our sunrooms provide custom designed additional living space embedded with natural light, attached to and accessible from your home or park model trailer. In northern climates a southern exposure is the best location because the sunroom will receive light the majority of the day. In southern climates an easterly exposure is best for providing morning sun and shade the rest of the day.

The roof of a sunroom can be all glass, which may result in significant heat loss in cooler weather or attraction of too much heat in the summer.

A solid aluminum insulated roof sunroom (R12 to R 24) is the answer. A sunroom usually has windows on all sides which allows sunlight into the room. If one would like to enhance the light further then optional skylights can be ordered which will provide further light without the disadvantages of a fully glassed roof. Choose an operating skylight if you are in a southern climate to allow you further options to release any unwanted heat in the sunroom.

Our sunrooms offer the client the options of glass or tinted soft vinyl. Glass is a bit more expensive but provides more clarity, while the vinyl is tough and has memory! Our extended season sunrooms are built with low E Argon filled thermal pane glass which reflects the heat and ultraviolet rays.

Our Insulated Aluminium Hard Roof sunroom, Patio Enclosure comes in both a Mono-Slope(left) or a Gable roof style(right) and is available in sizes that are built to serve the needs of the client. There are four different sunroom, Patio Enclosure models.

1.	Model 100 sunroom: Fully screened only; with no windows. This model of sunroom, Patio Enclosure includes a sliding single pane glass patio door with screen. Has 2" insulated walls (R8). White or brown patio doors are available in 5', 6' or 7' widths, although 6' width is the most commonly used.
2.	Model 200 sunroom: The sunroom, Patio Enclosure has 2" walls (R8). The windows are aluminum framed 4 track vertictal sliders (slides up and down) with a full screen. This model sunroom includes a sliding single pane glass patio door with screen. White or brown patio doors are available in 5', 6' or 7' widths, although 6' is the most commonly used.
3.	Model 300 sunroom: This three season sunroom, Patio Enclosure has 3" walls (R12) with operating horizontal slider PVC framed glass windows with vinyl inserts and brass rollers and screens. This model includes a sliding single pane glass patio door and screen. White or brown patio doors are available in 5', 6' or 7' widths, although 6' is the most commonly used.
4.	Model 400 sunroom: The extended season sunroom, Patio Enclosure has 3" walls (R12), double-glazed thermal glass horizontal slider, framed PVC windows with vinyl inserts, brass rollers and screens and includes a double glass thermal pane sliding white or brown patio door and screen. Extrusions in this room are made with a thermal break. This model is not a four season sunroom, Patio Enclosure and requires a door closing it off to the rest of the house in cold climates.

A sunroom, Patio Enclosure may also be installed on a park model trailer. (left)

Each sunroom, Patio Enclosure is built from modular walls panels and modular roof panels. On all sunroom, Patio Enclosure models, the walls can be extensively windowed (or screened in the case of the fully screened sunroom, Patio Enclosure Model 100) except for 3" at each corner of the sunroom, Patio Enclosure. To accomplish the extensive windows, four sizes of standard window are available (36", 42", 48", and 54" wide). Custom sized windows may also be obtained. The walls of the three season sunroom, Patio Enclosure are 3" thick and insulated with 1 pound expanded polystyrene (R12) vacuum pressed between a .024" stucco embossed aluminium skin (colour options) on the external side and a .032" embossed white polyvinyl chloride (P.V.C.) (colour options) skin on the inside. The aluminium has a baked, powder coated paint finish. The P.V.C. is used on the inside of the sunroom in lieu of aluminium as it is resistant to dents and is therefore more user-friendly for families with young children. All sunroom models come with one sliding patio door. Optional additional patio or hinged doors can be added to the sunroom, Patio Enclosure. The customer has a choice of external wall colours (some colours are at additional cost).

Sunroom (optional glass kick plate)

In the 3 season sunroom, the windows start approximately 20" from the floor and are 60" high. The PVC framed windows are single glazed except for the extended season sunroom which is built with double glazed thermal window having ½" of dead air space between the glass and are low "E" Argon filled. The double glazed windows start approximately 24" from the floor and are 55" high.

If the client would like to enhance the amount of window in the sunroom, optional tempered glass kick-plates can

be installed (see above) in the walls (these go from below the normal window to just above the floor) as well as optional glass transoms (these go from just above the normal windows to just below the roof) can be purchased. (see right) The walls of the sunroom, Patio Enclosure can meet at 90 degree (normal type corners) or 45 degrees.

Sunroom (optional glass transoms)

All sunroom, Patio Enclosure models come with an insulated aluminium hard roof that is available in varying thicknesses, 3", 4", 6" (R12, R16, R24). The roof is made of 1 pound expanded polystyrene vacuum pressed to .024" stucco embossed aluminium skin on both sides.
	The aluminium has a baked, powder coated white (colour options) paint finish. The thicker the roof the higher the insulation value and the greater the strength. The roof panels are 48" wide and are joined by an extrusion which forms a pressure cap for greater strength than other types of systems that use modules that snap together.

Fixed or operating Skylights are available as an option and more than one skylight may be placed in a roof of the sunroom, Patio Enclosure if desired by the client. Locations of Skylights in the roof can be specified by the customer but must be at least 2" from the edge of the roof panel. Normally Skylights are centered in a roof panel. The hole for the skylight is pre-cut in the factory.

The benefit of the aluminium roof over one which is entirely glass is the insulation value in the roof. Making it cooler in summer and warmer in cool temperatures. The skylight option allows the client to choose the amount of light that they wish to enter through the roof.

The sunroom, Patio Enclosure roof comes with an integrated extruded gutter and fascias. The customer has a choice of gutter and fascia colours. These are normally matched to the colour of the walls. In addition, if the customer wishes the gutter and fascia may be dressed up with optional colour strips.

When a sunroom, Patio Enclosure is attached to a home it must be installed on a deck, which has been built on 10" diameter concrete sono tubes or technoposts which go well below the frost line or a suitably constructed concrete pad.

When a sunroom, Patio Enclosure is attached to a trailer it must be installed on a deck that is built on a base indicated below:

Dig 6" deep and:

Deck Block
Patio Stone
2" Styrofoam
2" crushed Stone

The sunroom, Patio Enclosure is considered a permanent structure and it is the client's responsibility to determine the local construction requirements and permits, if any, required in the municipality in which they live.

We also offer ThermaDeck, an insulated deck on which the sunroom, Patio Enclosure can be installed. It is available in 4" (R19.5), 6" (R28.5) and 8" (R37.5) thickness. This deck would be installed on a framed 2" x 10" pressure treated lumber structure built up on concrete sono tubes or technoposts which go well below the frost line.

Where the sunroom, Patio Enclosure is installed under a home roof, an eaves-trough must be installed on the house to avoid significant amounts of water being dumped on the sunroom, Patio Enclosure roof from the house.

All parts in the kit are made of rust resistant aluminium.

Options indicated above are available at extra cost.

We also accept Postal & Bank Money Orders

TOLL FREE Phone: Fax: 1-866-575-2322 1-866-575-2324