Privacy,
Wind panels are an option for either the free
standing, screen room or patio enclosure.
They are used to create privacy for a screen
room, patio room and in that manner it may
be used as a change room or extra room during
the summer time. These panels can also reduce
penetration of the sun, cut down the wind
and protect against rain.
The panels are interchangeable, that is they
will fit in any screen frame, except for the
door, which is a special size panel.
The panels are made of a cold rolled aluminium
frame with baked, powder coating paint and
either clear or opaque (10-gauge) shoe-calf
vinyl depending on the client's preference.
There is a vertical centre bar in the panels
to prevent the frame from bowing, which may
otherwise result from tightening of the vinyl.
The panels are held in place in the screen
room frame by the horizontal cross member
in the screen frame and a groove in the bottom
or top of the screen frame extrusion against
which a stainless steel spring exerts pressure.
The privacy/wind panels are easily inserted
and removed using the finger tabs in the frame
of the panel.
All parts are made of rust resistant aluminium
except extruded plastic corners, plastic finger
tabs and the soft shoe-calf vinyl.